A shock absorbing mounting for a rotating warning light for a light bar is provided by the assembly of the rotator with a base member useful for mounting one or more rotators and other light producing array units. The light bar base member has longitudinal grooves and the mounting enables the rotator to be attached wherever desired along the grooves. The grooves are blind grooves. The rotator has its own base with a plurality of holes in which are provided resilient shock absorbing grommets with holes therethrough. The assembly of the rotator to the light bar base member is via self-threading screws which have heads, parts of which may be washers, which enlarge the diameter of the heads. The screws are of such length that when they engage and are stopped by the bottom of the grooves, the head compresses the grommet sufficiently to provide a resilient shock absorbing connection. The height of the grommet and the depth of the grooves to the bottom are slightly longer than the length of the screw up to the head thereof, such that when the screw is bottomed in the groove the grommet is compressed to a desired extent which provides a connection while retaining the shock-absorbing characteristics of the grommet and without the need for additional elements to set the amount of compression of the grommet.
Christopher D. Jacobs - Honeoye Falls NY, US Steven W. Neufeglise - Rochester NY, US Stephen T. Vukosic - West Henrietta NY, US Robert J. Gross - Rochester NY, US J. Douglas Richardson - Pittsford NY, US Michael F. Mastin - Livonia NY, US J. Andrew Howard - Honeoye Falls NY, US R. Michael Datz - Rochester NY, US
R. Michael Datz - Rochester NY, US Robert J. Gross - Rochester NY, US Steven W. Neufeglise - Rochester NY, US Stephen T. Vukosic - West Henrietta NY, US J. Douglas Richardson - Pittsford NY, US Michael F. Mastin - Livonia NY, US
Assignee:
Start Headlight & Lantern Co., Inc. - Avon NY
International Classification:
B60Q 1/00
US Classification:
362493, 362496, 362476, 362549
Abstract:
A light bar has several modular light source heads which may contain different types of light sources as well as different technologies mounted in cages by shock absorbing grommets. The cages are mounted on a bottom member so that the heads can be arranged along opposite sides and the ends of the bottom members. The heads are captured, and assembled with the bottom member, by a top member which also captures translucent or transparent members or lenses along the sides of the light bar and, transparent or translucent end caps which may also provide lenses for the light source heads at the ends of the bar. The end caps are removably connected to the top and bottom members at the ends of the bar by screws extending through the end caps. The light source modules have the same wiring connected thereto by connectors from a connector board to connectors along the back ends of the light source heads. The top member is attached to posts extending from the bottom member by screws so as to enable removal of the top member to expose the light source modules.
James H. Karlin - Fairport NY Stephen T. Vukosic - Rochester NY Michael F. Mastin - Livonia NY
Assignee:
Star Headlight and Lantern Co, Inc - Avon NY
International Classification:
G08B 2300
US Classification:
340321
Abstract:
A visual signaling device has one or more light source modules arranged in a stack. Each module is of "Tri-liptic" i. e. generally triangular shape, but with the triangle corners rounded. Inside the triangle, is a perfect circle, to aid in the optical dispersion of the light source. The modules are each formed by back and front moldings. The front molding defines one of the sides of the module, while the back molding defines the other two sides of the module. The light source module contains a light source (incandescent, halogen, rotating, strobe or LED) on a printed circuit board. This module also contains the electronics, which operate the light source, and can cause it to flash, be illuminated constantly or operate a rotating reflector around a stationery bulb. A conduit, which is a strip of printed circuit board with connectors at its opposite ends, extends between the top and bottom of each module of the stack. The board containing the light source is inserted via guides into another connector which is attached to the conduit.